![]() ![]() ![]() Connect the X-TOUCH and X AIR Mixer using a standard Ethernet LAN cable, or alternatively using 2 MIDI cables (when “Ifc Mode” is MIDI).If necessary, go to the X-TOUCH product page on and download the most recent firmware update to your PC.The current firmware is briefly displayed above “BARS” when starting (OR hold down the display button while powering on).Make sure your X-TOUCH is updated to firmware 1.15 or higher.Open the Setup/Connection page and upload the new firmware to your mixer.Connect the X AIR EDIT application on your PC with your X AIR Mixer.If necessary, go to your X AIR Mixer’s product page on and download the most recent firmware to your PC.Make sure your X AIR Mixer is updated to firmware 1.13 or higher.Rtp-midi is only available mcu and hui mode. Rtp-midi (ethernet midi) becomes disabled and you must use the usb for controlling your daw. In xctl/mc-mode ethernet is dedicated for the x32/xair. ![]() The following was compiled from a number of sources by Gary Higgins ( ) ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |